Homologated tyres are those that have been approved directly via a manufacturer. These tyres are ones that have met the standards and regulatory requirements of the manufacturer.
The energy lost when a tyre is in motion is known as 'rolling resistance'. This has a direct impact on fuel consumption.
A tyre's rolling resistance score ranges from A to G. Over the life of the tyre, fitting an A rated tyre could save you up to 6 litres of fuel when compared to a G rated tyre.
A tyre's wet grip capacity is expressed in Grades from A to G.
The difference in braking distances between each grade is roughly 3m - an average car length. This makes average stopping distance between an A and G rated tyre 18m. That's 4 car lengths.
The exterior noise grade of a tyre is expressed in decibels - accompanied by one, two or three sound waves, with one wave being the best noise level performance.
To achieve the best grade, a tyre’s noise level must be at least 3dB under the legal limit set by the EU.
Designed especially for motorhomes, for long tyre life and very safe journeys!
Design and technology derived from the new Michelin Agilis van tyre range
Design and technology, such as the DCP (Durable Contact Patch), derived from the new Michelin Agilis, leading to a long lasting tyre capable of use over several seasons.
A reinforced construction using two casing plies enables the use of higher inflation pressures to provide resistance to heavy loads (up to the tyre's rating.
Protected sidewalls: 8 kerbing protectors have been positioned on each sidewall to increase resistance to sidewall scuffing.
A tread pattern with more sipes and more grooves, combined with a rubber compound capable of operating over a wide temperature range, provides sufficient grip for occasional use in difficult conditions
(track, mud, snow, etc.).